injector sleeve removal

Injector Sleeves Diesel Engine Owners may have heard of something called “injector sleeves”. The injector sleeves are tiny tubes that keep the injectors in their place inside your engine. Injectors are such a crucial component as they facilitate the engine in running nicely by squirting fuel into it. These sleeves after some time can get old and deteriorate due to the engine heat as well from pressure. When this occurs, they will need to be substituted or repaired. This is the procedure for breezing injector sleeves.

Step 2: Remove the Injector Well, the first process to remove is injector itself. In order to accomplish this, you must first disconnect any of the electrical connections or fuel lines that are typically attached to an injector. Then, remove the injector retainer bolts using your socket wrench. Watch out for this step, cause you can lose little parts like shims or washers that might be behind the injector

Step-by-Step Guide to Removing Injector Sleeves

Step 3: Remove the Old Injector Sleeve With the Injector removed it's time to remove the original injector sleeve. Install the slide hammer to the injector sleeve remover tool, and niceley insert it into he hole with which you removed the fuel injector. After it is in, simply pull the slide hammer and out comes the sleeve. Just make sure you go easy but steady, these can get stuck due to the sleeve.

D) Install the new Injector Sleeve When the old sleeve has been to removed… it is time for a new one. Accordion Fit Oil itself inside the new sleeve is quite helpful for it to go on better Gently slide it into the slot of old sleeve. Lastly, screw the door hinge bolts with your socket wrench so that it is tight in its place.

Why choose HTL hongtu injector sleeve removal?

Related product categories

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now

Get in touch